| | | | | | | |  | General Purpose BucketAuger | | | | | | | | | | | GP (general purpose) bucket1. OverviewSuitable for normal digging workIdeal for general excavation Optimal profile being capable of maximum excavation efficiently Eminent abrasive resistant capability ensured by adopting 400 BHN in critical areasUltimate bending and torsional stiffness imposed in upper beamAbrasive resistant material used in mounting boss with ARMCorner digging effect improved by aligning edge teeth with side cutting plateAR-material (T-1 equivalent) used in bottom and side wear platesWelding typed single side cutter2. Characteristics 3. Specifications [metric][ft-lb]Metric unit Model Width(mm) Struck capacity(M^3) Rated capacity(M^3) Weight (kg) CECE SAE Class 10 GP10-24 610 0.27 0.30 0.33 402 GP10-27 690 0.32 0.35 0.39 435 GP10-30 764 0.36 0.40 0.44 458 GP10-33 840 0.40 0.45 0.50 494 GP10-36 914 0.44 0.50 0.55 517 GP10-39 990 0.48 0.55 0.61 553 Class 20 GP20-24 610 0.32 0.35 0.38 554 GP20-30 764 0.43 0.48 0.52 599 GP20-36 914 0.53 0.60 0.66 657 GP20-42 1066 0.64 0.72 0.81 731 GP20-48 1266 0.74 0.85 0.96 810 Class 30 GP30-27 686 0.43 0.47 0.52 620 GP30-30 762 0.49 0.54 0.60 670 GP30-36 914 0.61 0.68 0.76 745 GP30-42 1066 0.73 0.82 0.92 817 GP30-48 1218 0.85 0.97 1.09 901 GP30-54 1372 0.97 1.11 1.25 972 Class 40 GP40-30 766 0.56 0.62 0.68 862 GP40-36 916 0.70 0.78 0.86 969 GP40-42 1066 0.84 0.95 1.05 1050 GP40-48 1226 0.99 1.12 1.25 1162 GP40-54 1376 1.12 1.28 1.44 1246 GP40-60 1526 1.26 1.44 1.63 1351 Class 50 GP50-30 766 0.66 0.72 0.78 1017 GP50-36 916 0.82 0.91 1.00 1144 GP50-42 1066 0.98 1.09 1.21 1241 GP50-48 1226 1.15 1.30 1.44 1375 GP50-54 1376 1.31 1.49 1.66 1472 GP50-60 1526 1.47 1.67 1.88 1599 Class 60 GP60-33 846 0.82 0.90 0.98 1270 GP60-36 916 0.91 1.00 1.09 1351 GP60-42 1070 1.09 1.21 1.33 1465 GP60-48 1222 1.28 1.42 1.57 1607 GP60-54 1376 1.46 1.64 1.82 1723 GP60-60 1530 1.65 1.86 2.07 1866 Class 70 GP70-33 846 0.95 1.03 1.12 1455 GP70-36 916 1.05 1.15 1.24 1557 GP70-42 1070 1.26 1.39 1.52 1684 GP70-48 1222 1.47 1.64 1.80 1853 GP70-54 1376 1.69 1.89 2.09 1980 GP70-60 1530 1.90 2.14 2.38 2150 Ft-lb unit Model Width(ins) Struck capacity (YD^3) Rated capacity(YD^3) Weight(lbs) CECE SAE Class 10 GP10-24 24 0.35 0.39 0.43 890 GP10-27 27 0.42 0.46 0.51 960 GP10-30 30 0.47 0.52 0.58 1010 GP10-33 33 0.52 0.59 0.65 1090 GP10-36 36 0.58 0.65 0.72 1140 GP10-39 39 0.63 0.72 0.80 1220 Class 20 GP20-24 24 0.42 0.46 0.50 1230 GP20-30 30 0.56 0.63 0.68 1330 GP20-36 36 0.69 0.78 0.86 1530 GP20-42 42 0.84 0.94 1.06 1700 GP20-48 50 0.97 1.11 1.26 1880 Class 30 GP30-27 27 0.56 0.61 0.68 1370 GP30-30 30 0.64 0.71 0.78 1480 GP30-36 36 0.80 0.89 0.99 1650 GP30-42 42 0.95 1.07 1.20 1810 GP30-48 48 1.11 1.27 1.43 1990 GP30-54 54 1.27 1.45 1.64 2150 Class 40 GP40-30 30 0.73 0.81 0.89 2040 GP40-36 36 0.92 1.02 1.13 2280 GP40-42 42 1.10 1.24 1.37 2470 GP40-48 48 1.30 1.47 1.64 2720 GP40-54 54 1.47 1.67 1.88 2910 GP40-60 60 1.65 1.88 2.13 3150 Class 50 GP50-30 30 0.86 0.94 1.02 2250 GP50-36 36 1.07 1.19 1.31 2530 GP50-42 42 1.28 1.43 1.58 2740 GP50-48 48 1.50 1.70 1.88 3040 GP50-54 54 1.71 1.95 2.17 3250 GP50-60 60 1.92 2.18 2.46 3530 Class 60 GP60-33 33 1.07 1.18 1.28 2800 GP60-36 36 1.19 1.31 1.43 2980 GP60-42 42 1.43 1.58 1.74 3230 GP60-48 48 1.67 1.86 2.05 3550 GP60-54 54 1.91 2.15 2.38 3800 GP60-60 60 2.16 2.43 2.71 4120 Class 70 GP70-33 33 1.24 1.35 1.47 3210 GP70-36 36 1.37 1.50 1.62 3440 GP70-42 42 1.65 1.82 1.99 3720 GP70-48 48 1.92 2.15 2.35 4090 GP70-54 54 2.21 2.47 2.73 4370 GP70-60 60 2.49 2.80 3.11 4740Bore Pile Works Equipment 2nd Hand Products will be repaired at our factory. These Products is sellling at the lower price. |
| | [ Contact Info ] |  Company | Sun and Shield Co., Ltd.Bore Pile Works Equipment 2nd Hand Products will be repaired at our factory. These Products is sellling at the lower price. | | Address | 3rd F/L Eunsung Building, 737-5 Shinchen-dong Siheung-si Gyeonggi-do 429-450 Korea | | Phone | 82 - 31 - 3124418 | | Fax | 82 - 31 - 3124419 | | Homepage | www.i-sns.com | | Contact | |
| | | | | | | |
| | | | |